Self-cleaning filter FW

IN-LINE FILTERS > Self-cleaning filter FW

INTRODUCTION:

The FW self-cleaning filter is designed for the removal of solids with sizes from 2 mm in pressure pipe circuits. It is characterized by being inserted as an element of the pipe itself, with no interruptions in direct flow as in the case of the other models.

The cleaning is carried out continuously by sectors, allowing cleaning and filtering simultaneously. The use of fish shapes in the filter element allows high throughput speeds with low pressure drop. Backwash is achieved by the pressure difference between the cleaning pad and the downstream side of the filter, so it can be installed in the suction of the pumps, provided that the pumps are under load. (Positive pressure at suction point).

 

DESCRIPTION:

The FW self-cleaning filter has the following components:Filter crown: Composed of an outer ring and spokes. The filter element is fixed behind this part.

  • Waste collector: Adjusts with the sectors of the filtering rim making a seal that causes a flow of water to flow against the current and clean the corresponding section continuously.

  • Filter’s body: The body is shaped like a flanged spool at both ends, with the back-flushing mouth, and the supporting legs.

  • Drive motor gearmotor unit.

  • Differential pressure switch, backwash valve and electrical panel.

OPCIONALS:

  • Auxiliary cleaning socket.
  • Inspection records.

GENERAL DIMENSIONS:

CLIENTE / CUSTOMER

CANT./QTY

PROYECTO / PROJECT

AQUALIA

3 FW-1000

ETAP QUERÉTARO/MEJICO
DRAGADOS

1 FW-1200

RIEGOS MONTE SASO DE BIOTA - ZARAGOZA
TECNOMAN

1 FW DN1800

 
UTE LLEIDA G4

3 FW-1400

SEGARRA GARRIGUES
UTE LLEIDA G4

1 FW-1200

SEGARRA GARRIGUES
UTE SOSES (MARCOR EBRO, S.A. Y CONSTRUCTORA HISPANI CA, S.A.)

1 FW-1400

MODERNIZACION DEL RIEGO EN LA COMUNIDAD DE REGANTES DE ARAGÓN Y CATALUÑA-SOSES (LÉRIDA)
UTE RIEGO PIRACÉS

1 FW-1000

COMUNIDAD DE REGANTES PIRACÉS (HUESCA)
FERROVIAL AGROMAN, S.A.

2 - FW-1600 Y FW-1000

COMUNIDAD DE REGANTES DEL SECTOR VII DEL CANAL DEL FLUMEN. SAN LORENZO DEL FLUMEN (HUESCA)
FILTRATECNO

1 FW DN 1000

ACEQUIA XIII-46
ACSA S.A.

1 FW-1300

ESTACION DE BOMBAMENT.XARXA SEGARRA-GARRIGUES.SECTOR 2
TRAGSA

2 FW-1800

RED DE RIEGO DE LOS SECTORES XVIII… DE MONEGROS (ONTIÑENA Y BALLOBAR)
OHL, S.A. (OBRASCON HUARTE LAIN, S.A.)

1 FW-1200, 1 FW-1400

CANAL DEL FLUMEN

These devices allow to continue filtering while performing self-cleaning, being especially suitable for those applications where continuous filtering is an important parameter of the process. Filtramas recommends the installation of its FB or FW in-line filters according to the flow and filtration needs.

Band screens are those equipments, installed in a channel or , which has a series of filtering surfaces in continuous movement. Its mission is to extract the suspended solids of a certain size that accompany the effluent. There are several types of band screens, depending on the characteristics of the effluent and the installation:

The objective of this equipment is to protect the WWTP or pumping well from the possible arrival of large objects capable of causing obstructions in the different units of the installation. This operation consists of passing the waste water through a screen that separates and evacuates the bulky materials dragged along. They will retain large-sized solids such as branches, leaves, paper, tree roots, plastics, wipes, rags, etc., preventing damage and blockages to pumps, valves, pipes and other elements present in subsequent treatment processes of the purification plant.

These devices allow to continue filtering while performing self-cleaning, being especially suitable for those applications where continuous filtering is an important parameter of the process. Filtramas recommends the installation of its FB or FW in-line filters according to the flow and filtration needs.

Filter sieves offer high performance in the solid-liquid separation process. Our range of equipment responds to the different possible needs for each case.

FILTRAMAS, S.A. has a wide range of solutions for the transport and compacting of the waste extracted by its machines, in a clean and discreet. The conveying and compacting systems can be with screws with final draining zone or hydraulic presses.

The conveyor-compactor screws supplied by FILTRAMAS, S.A., coupled together with its equipment, allow us to obtain a totally clean and fair-faced installation. The screw loading openings are designed for coupling to the discharge opening of the extraction equipment (bars movable grilles or screens), and the intermediate spaces are covered by a fairing.

In any water treatment or purification plant, there is a continuous need to isolate or regulate the flow of water in the channels and manholes or holes in walls (wall gates). This function is carried out by means of the placement of gates and cofferdams.

The result of our experience is the establishment of a standardization that determines a satisfactory result with a simple construction. For this reason, Filtramas has been developing the manufacture of penstocks and flashboards.

Filtramas manufactures channel hatches, wall hatches and cofferdams for different applications and uses.

The accumulation of solid waste in water treatment requires effective mechanized solutions for its extraction. FILTRAMAS, S.A. has a wide variety of equipment for the dragging of solid waste.

In the biological treatment of wastewater, a series of processes are generated based on the cultivation of bacterial microorganisms for the elimination of organic matter, nitrogen and phosphorus. It is one of the most common treatments for its simplicity and low cost.

FILTRAMAS, S.A. has a wide variety of equipment for bacterial culture applied to the treatment of urban and industrial wastewater.

The dewatering of sludge is an essential process in the management of solid waste generated in water treatment. FILTRAMAS, S.A. offers different mechanized solutions to the problem according to the different possible needs.

FILTRAMAS S.A. has a wide variety of solutions for all kinds of problems associated with the treatment and cleaning of water, mud and sand. We develop our specialisation on the basis of the experience accumulated by our professionals, constant effort and close collaboration with our clients. FILTRAMAS S.A. perfects new products, looking for economic and effective solutions. Any problem that arises in the handling of fluids is carefully analyzed in order to find an economically balanced solution.