TTAR Spillway Screens

SIEVES > TTAR Spillway Screens

INTRODUCTION:

A fundamental point in the unitary sanitation systems are the spillways. Its mission is to evacuate, in the nearest watercourse, the excess flow over which the treatment plant has been designed. But rainwater collected in the first 10-15 minutes of precipitation is as polluted as medium-type wastewater and after 20-30 minutes as diluted wastewater.

The spillway sieves manufactured by Filtamas S.A. are designed to prevent the discharge of a large quantity of suspended and floating solids into riverbeds without any prior treatment during rainfall events. The TTAR spillway sieves are placed in the inlet manifolds in front of the side spillway. In this way, the waste remains on the side of the collector or arrival channel for subsequent treatment in the WWTP.

DESCRIPTION:

The TTAR spillway sieve is a very good solution for both new and existing installations where it cannot otherwise be installed or where there are hydraulic restrictions upstream.

In addition, as this equipment is usually installed in places that are difficult to access or where there is no room for waste extraction, it is ideal since the waste remains on the side of the collector or arrival channel for subsequent treatment in the WWTP. The two-dimensional dimensional clearance of the perforated plate ensures high solids retention.

The spillway sieve TTAR is placed horizontally in the inlet manifolds in front of the side spillway. It consists of an inverted perforated half-shaft, with a 180º arc, which acts as a filtering mesh and a screw conveyor that turns concentrically to it. The mesh is cleaned by an adjustable, wear-resistant brush mounted on the edge of the worm. The equipment operates fully automatically during rainfall events.

The drive is carried out with a fully submersible geared motor driven by a highly reliable hydraulic unit.

The TTAR spillway sieve has the following FEATURES:

  • Passing light in two dimensions, 3-6 mm in perforated plate.
  • Installation in side landfills and storm tanks.
  • Very robust and low maintenance equipment.
  • Fully automated continuous cleaning of the filter screen.
  • Efficient separation and removal of suspended and floating solids.
  • Treatment of large flows even in installations with upstream hydraulic restrictions.
  • The waste remains in the channel or the arrival collector for later use treatment in plant.
  • It can work completely submerged because it has an oleohydraulic drive.
  • Maximum flexibility when it comes to installing it both in new buildings and in existing installations.

GENERAL DIMENSIONS:

CLIENTE / CUSTOMER

CANT./QTY

PROYECTO / PROJECT

ABENSUR

1

Edar Brea de Tajo
ABENSUR

1

Edar Estremera
ABENSUR

1

Edar Villamanrique de Tajo
ABENSUR

1

Edar Fuentidueña de Tajo
ABENSUR

1

Edar Villarejo de Salvanés
AGUAS FILTRADAS

2

Aliviadero Alcalá
ALDESA

1

Ampliación Parque la Fortuna
DINOTEC

1

EBAR SAN GEOLIT Y AMP. EDAR MENGIBAR
DRACE MEDIOAMBIENTE

1

EDAR EL ESPARTAL (MADRID)
FERROVIAL/AGROMAN

5

Saneamiento Torrelodones
IOMSAL

1

EDAR EL PASTEL Y EDAR LOS MOLINOS
JOCA

6

EDAR'S ALMONACID (CUENCA)
MP SERVICIOS INDUSTRIALES

1

Edar El Cuervo
SACYR

1

Campus Boadilla
SPA

1

Edar Venturada
SPA

1

Edar Puebla de la Sierra
SPA

1

Edar Lozoyuela
SPA

1

Edar Gascones
UTE COLECTORES ARROYO QUIÑONES

1

Ebar Arroyo Quiñones
UTE EDAR SAN BARTOLOME

1

EDAR SAN BARTOLOME DE LA TORRE
UTE PAS-SPA

1

Edar Arenas de San Pedro

Filter sieves offer high performance in the solid-liquid separation process. Our range of equipment responds to the different possible needs for each case.

Band screens are those equipments, installed in a channel or , which has a series of filtering surfaces in continuous movement. Its mission is to extract the suspended solids of a certain size that accompany the effluent. There are several types of band screens, depending on the characteristics of the effluent and the installation:

The objective of this equipment is to protect the WWTP or pumping well from the possible arrival of large objects capable of causing obstructions in the different units of the installation. This operation consists of passing the waste water through a screen that separates and evacuates the bulky materials dragged along. They will retain large-sized solids such as branches, leaves, paper, tree roots, plastics, wipes, rags, etc., preventing damage and blockages to pumps, valves, pipes and other elements present in subsequent treatment processes of the purification plant.

These devices allow to continue filtering while performing self-cleaning, being especially suitable for those applications where continuous filtering is an important parameter of the process. Filtramas recommends the installation of its FB or FW in-line filters according to the flow and filtration needs.

Filter sieves offer high performance in the solid-liquid separation process. Our range of equipment responds to the different possible needs for each case.

FILTRAMAS, S.A. has a wide range of solutions for the transport and compacting of the waste extracted by its machines, in a clean and discreet. The conveying and compacting systems can be with screws with final draining zone or hydraulic presses.

The conveyor-compactor screws supplied by FILTRAMAS, S.A., coupled together with its equipment, allow us to obtain a totally clean and fair-faced installation. The screw loading openings are designed for coupling to the discharge opening of the extraction equipment (bars movable grilles or screens), and the intermediate spaces are covered by a fairing.

In any water treatment or purification plant, there is a continuous need to isolate or regulate the flow of water in the channels and manholes or holes in walls (wall gates). This function is carried out by means of the placement of gates and cofferdams.

The result of our experience is the establishment of a standardization that determines a satisfactory result with a simple construction. For this reason, Filtramas has been developing the manufacture of penstocks and flashboards.

Filtramas manufactures channel hatches, wall hatches and cofferdams for different applications and uses.

The accumulation of solid waste in water treatment requires effective mechanized solutions for its extraction. FILTRAMAS, S.A. has a wide variety of equipment for the dragging of solid waste.

In the biological treatment of wastewater, a series of processes are generated based on the cultivation of bacterial microorganisms for the elimination of organic matter, nitrogen and phosphorus. It is one of the most common treatments for its simplicity and low cost.

FILTRAMAS, S.A. has a wide variety of equipment for bacterial culture applied to the treatment of urban and industrial wastewater.

The dewatering of sludge is an essential process in the management of solid waste generated in water treatment. FILTRAMAS, S.A. offers different mechanized solutions to the problem according to the different possible needs.

FILTRAMAS S.A. has a wide variety of solutions for all kinds of problems associated with the treatment and cleaning of water, mud and sand. We develop our specialisation on the basis of the experience accumulated by our professionals, constant effort and close collaboration with our clients. FILTRAMAS S.A. perfects new products, looking for economic and effective solutions. Any problem that arises in the handling of fluids is carefully analyzed in order to find an economically balanced solution.